Atten MS-300 3 in 1 Rework Station Atten

The Atten ST-862D hot air soldering station is a unit with 1000 watts of power, whereby the station reaches operating temperature very quickly. The temperature can be set manually between 100 and 480°C or set to one of three user-defined temperatures at the push of a button. The device has an adjustable volume flow (max. 120 L / min). With the silicone buttons, temperature & volume flow as well as a variety of built-in functions such as an auto-sleep function can be regulated. In addition, the system has an overheating protection system and a good cooling system that allows very long operation.

ST-862D Features

● LCD display screen making control visualization
● Temperature unite switching function
● Temperature locking, timed work function
● Strong air volume with brushless fan
● Compensation for constant working
● Easy to replace with a pluggable heater
● Convertible with straight air and spiral air
● MCU-controlled temperature calibration

The Atten ST-965 soldering station has a high-quality heating element with 65 watts of power. The ST-965 is equipped with a user-friendly display. The soldering station automatically lowers the temperature to 200°C when not in use. This enables a longer service life of the soldering tip. Three different soldering temperatures can easily be programmed individually and can be called up directly by pressing the appropriate selection key.

ST-965 Features

● Maximum Power of 65W, soldering iron 28V AC
● Very fast heating: from room temperature to 350 ° C only approx. 10 s
● Internally heated soldering tip, fast and efficient heat transfer to the entire soldering tip
● High-contrast multifunction LC display for status and programming display
● Control of operational readiness by bar display
● Soldering iron with flexible connection cable
● Soldering tip temperature freely selectable between 200°C and 450°C
● 3 freely adjustable temperature memories
● Exact calibration of the temperature possible, calibration range ±50°C
● Temperature stability: ±1°C (without load / MCU-controlled temperature calibration)
● Temperature setting possible in 5-degree or 1-degree steps
● Automatic, adjustable temperature reduction in soldering breaks to 200°C
● Protection against changing the soldering tip temperature
● Warning in the event of device malfunctions
● Acoustic feedback when a button is pressed (can be switched off)
● ESD-safe design, low-voltage heating completely separated from the power supply
● Freely adjustable soldering iron holder
● High-quality four-wire heating element with silver alloy for quick heating
● Intelligent detection of work or non-work status
● Low voltage heating separated from the power supply to make the soldering work safer
● Interchangeable 900M series (soldering tips) to save usage costs
● Password protection function and temperature unit switching function

The Atten APS15-3A is an adjustable laboratory power supply with a maximum output power of 56W. The voltage can be adjusted in fine steps between 0-15 V. The current intensity can be switched between 0.5 and 3A with a switch. The device has an LCD screen and an analog display. The power supply unit of the APS series was developed for the requirements of communication maintenance technicians, schools, and developers. The product uses a series type regulated voltage scheme with the best current stability and is controlled by a digital MCU chip. It is characterized by very high stability and low residual ripple, simple operation and control as well as a large number of protective functions, it is particularly suitable for use in the communications industry.

APS15-3A Features

● Digital control, serial setting mode control, low ripple, low noise, and high stability.
● Suitable for use with communication devices
● Fast dynamic load response speed, optimized processing for communication devices
● Independent 5V USB interface that provides 2.1A current output with overcurrent and short circuit protection
● Voltage and current can be switched in 2 stages to adapt to different devices, the voltage can be adjusted dynamically
● Built-in automatic voltage response adjustment function, which may be more suitable for full load use
● The digital encoder adjusts the voltage and can switch between coarse adjustment and fine adjustment, more precise control, and for a longer device service life
● Initial setting lock function, alarm function which can effectively prevent the wrong operation
● Intelligent fan control is automatically controlled according to the temperature of the internal power supply